Need help?Do you have a question about the Polk Audio PSW10 and is the answer not in the manual?
General| Driver Size | 10 inches |
|---|---|
| Amplifier Power | 50 watts RMS |
| Peak Power | 100 watts |
| Weight | 26 lbs |
| Enclosure Type | Vented |
| Low Pass Crossover | 80Hz - 160Hz |
| Phase Switch | 0/180 degrees |
| Frequency Response | 40Hz - 160Hz |
| Inputs | Line-level (RCA) inputs, Speaker-level inputs |
Details Dolby Digital speaker setup with specific settings for front, center, rear speakers, and subwoofer.
Outlines stereo connection setup, specifying subwoofer presence and settings for optimal audio.
Adjust by ear using a wide variety of CDs and video sources for deep, powerful bass without boominess.
Adjusts the frequency range for subwoofer operation for optimal bass response based on main speaker size.
Switch between settings with music to find the best balance of deep bass and natural lower octaves of the male voice.
To Next Page