Need help?Do you have a question about the Polk Audio PSW111 and is the answer not in the manual?
General| Driver Size | 8 inches |
|---|---|
| Frequency Response | 38 Hz - 250 Hz |
| Amplifier Power | 150 Watts RMS |
| Peak Power | 300 Watts |
| Weight | 20 lbs |
| Enclosure Type | Vented |
| Phase Switch | 0/180 degrees |
| Inputs | Line level and speaker level |
| Dimensions | 12.125" H x 11" W x 13" D |
Warning about high volume levels and potential hearing damage from Polk Audio loudspeakers and subwoofers.
Instructions on installing the subwoofer in a room, including placement near walls or corners.
Guide for connecting the subwoofer to the system, including hookup options.
Instructions for Option #1 hookup method using Dolby Digital receivers with "Sub Out".
Instructions for Option #2 hookup for stereo or Dolby Pro Logic receivers without "Sub Out".
Instructions for Option #2 hookup for two-channel or Dolby Pro Logic receivers without "Sub Out".
Instructions for Option #3 hookup, using receivers with full-range pre-out jacks.
Explains the various setting options for the subwoofer, including volume and low pass controls.
Describes the auto on/off feature for the subwoofer's power connection.
Details on how to fine-tune the subwoofer's volume, low pass, and phase settings.
Provides solutions for common subwoofer problems like no sound or incorrect sound.
Information on how to get help and service for the subwoofer.
English warranty details for the Polk Audio Loudspeaker Product.
To Next Page