Need help?Do you have a question about the Polk Audio PSW121 and is the answer not in the manual?
General| Brand | Polk Audio |
|---|---|
| Model | PSW121 |
| Category | Subwoofer |
| Language | English |
All safety and operating instructions should be read and retained for future reference.
All warnings and operating/use instructions on the appliance must be followed.
Clean with a damp cloth; do not use attachments not recommended by the manufacturer.
Do not use near water, in wet basements, or near swimming pools.
Use stable carts/stands and ensure ventilation openings are not blocked.
Operate from indicated source; do not defeat polarized plug safety feature.
Protect cords from damage; unplug during lightning storms.
Do not overload outlets or insert objects/liquids into the product.
Refer servicing to qualified personnel; unplug if damaged or not operating normally.
Use specified replacement parts and ensure safety checks post-service.
Use recommended carts/stands and move with care to prevent tip-over.
This product is not intended for use outdoors.
Understand power ratings for receiver/amplifier selection for optimal performance.
Extra power for peaks enhances sound quality and dynamics.
Turn volume down if distortion is heard to prevent speaker damage.
Subwoofer is not magnetically shielded; keep away from video monitors.
Place in entertainment center, behind furniture, or next to sofa/chair for best performance.
Always place on base feet side down; avoid open doorways.
Experiment with different locations to find best sound quality for your environment.
Subwoofer should be placed more than six inches from wall.
Note on additional satellite speakers for surround systems.
Connect Sub Out from receiver to Line In on subwoofer.
Ensure correct polarity (+ to +, - to -) for proper bass output.
Set 'Low Pass' filter clockwise; configure receiver settings for optimal playback.
Use 16 gauge or thicker wire; strip and twist ends for connection.
Connect receiver speaker outputs to subwoofer, then speakers to subwoofer.
Configure receiver settings: front LARGE, subwoofer OFF, others SMALL.
Offers settings for volume, low pass, and phase for optimal sound.
Subwoofer has auto on/off; use 'auto' setting for continuous power.
Adjust volume, low pass, and phase for desired bass and transition.
Guides on no sound, poor sound, or no power issues.
Covers defects for 5 years (speakers) and 3 years (electronics) from purchase.
Excludes damage from accident, misuse, abuse, unauthorized service, or cosmetic issues.
Limits liability for incidental/consequential damages and implied warranties.
Provides specific legal rights that may vary by state or region.
To Next Page