up, the steam will stop flowing. To restart
operations just fill the water tank again as de-
scribed in the chapter 1.
6. GENERAL MAINTENANCE
Ensure that Moppy is switched off and unplug
from the power supply.
Wait for the appliance to cool.
To clean the outside of the appliance, only
use a damp cloth and tap water.
Do not use detergents of any type.
The supplied microfiber cloths can be washed
following the instructions on the label, while
the electrostatic cloths are disposable.
7. STORAGE
7.1 Unplug Moppy from the power supply.
Wait for the appliance to cool.
7.2 Remove the moist cloth from the brush.
7.3 Place the brush over the base with the ar-
row pointing outwards (Standby Parking po-
sition) (20) and insert the telescopic tube into
the lock of the base handle (23).
7.4 Wind the power cable around the special
cable-winder hook (24).
WARNING: This operation must always be
done after having disconnected the applian-
ce from the mains.
WARNING: Do not grasp, lift, carry or tilt the
product from the base when still hot. Wait
for it to cool.
| 14 |
ENGLISH
To Next Page
Loading...
