Hold, Resume, & Switch Between Calls
Hold a Call
You can place up to two active calls on hold at any time.
• During a call, select Options > Hold.
• During a call, select the Hold softkey.
Resume a Call
You can resume any held call on the wireless handset.
• Select Options > Resume.
• Select the Resume softkey.
Switch Between Calls
You can switch between calls when you have at least one active call and one held call on the wireless handset.
• With one active call and a held call, press Swap.
Transfer a Call
You can transfer a call to another wireless handset, to a directory contact, or to a designated number.
Transfer a Call
You can transfer a call on your wireless handset to another contact to enable someone else to take the call or to
resume the call on another handset.
1. During a call, select Options > Transfer.
2. Enter a number or select a contact from a directory or the recent calls list.
3. Select Call.
4. Talk with your contact, then select Options > Transfer again to complete the transfer.
Blind Transfer a Call to a Contact
Blind transferring a call sends the call to another contact without your speaking to the contact first.
1. During a call, select Options > Blind Transfer.
2. Enter a number or select a contact from a directory or the recent calls list.
3. Select Transfer.
The phone transfers the call when the contact answers the call.
End Call
You can end an active call at any time. Do one of the following:
• Select End.
• Place the wireless handset in its cradle or the charging cradle.
User Help & Support
https://www.astound.com/business/support/
Place a Call
You can place a call using the Default Line or an Alternate Line.
Default Line. Unless you choose an alternate line, the phone uses your default line when you place a call.
1. Do one of the following:
• Enter your contact’s number.
• Select a contact from a directory.
• Select a contact from the recent calls list.
• Select a message from the Messages list.
2. Press Call
Alternate Line. You can choose to use an alternate line before placing a call.
1. Press Lines and select a line.
2. Do one of the following:
• Enter your contact’s number.
• Select a contact from a directory.
• Select a contact from the recent calls list.
3. Select OK.
4. Press Call