Poly Studio P15 - Using Your Poly Studio P Series Device; Default Poly Studio P Series Device Features; Download and Install Poly Lens Desktop App; Set Default Audio and Video Device

Using Your Poly Studio P Series Device
Connect your Poly Studio P Series device to your computer with the provided USB cable.
Once you plug in the device, you can start using it.
Default Poly Studio P Series Device Features
Several features are enabled by default on your device. You can change or disable some of these features using the Poly
Lens Desktop App.
Poly Studio P15 Features
The following features are enabled by default:
• Active Echo Cancellation
• Poly NoiseBlockAI on transmitted audio
• Automatic group camera tracking and framing
Download and Install the Poly Lens Desktop App
Download the Poly Lens Desktop App to access configuration settings and features.
See the Poly Lens Desktop App User Guide for information on using your device with Poly Lens Desktop.
Note: The Poly Lens application is not supported on Chromebooks at this time.
Task
1 Go to the Poly Lens App product page.
2 Select the applicable download for your operating system.
3 Follow the onscreen installation instructions.
Set Poly P Series Device as the Default Audio and Video Device
When you use the Poly Studio P15 personal video bar with a supported application for video calls, you may need to set the
device as the default audio and video device of your application.
The following is a general procedure that you can refer to. Your application may use different terms or categories.
Task
1 Go to your conferencing application’s Settings.
2 Find Audio Device and Video Device.
3 Choose your Poly Studio P Series device as the device for each category.
Important:
• If you only use the microphone and not the speaker, Active Echo Cancelation (AEC) may not work.
• If you only use the speaker and not the microphone, the LED indicator can't show the mute status of your meeting.
Restart Your Device
If you encounter issues with your device, you can try restarting it.
Task
» To restart your Poly Studio P15, unplug the power cable from the device and plug the cable back in to your device.
The device powers off and restarts after you plug it back in. You may need to reselect the device as the default audio
and video device for your conferencing software.
9