BT700 USB-C BT700 USB-A
1 Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait
for your computer to recognize it.
2 Put your Poly audio device in pair mode.
3 Launch Poly Lens Desktop App and navigate to Poly BT700.
4 Put your Bluetooth USB adapter into pair mode by selecting "Pair new device" on the
adapter's main page or overflow menu. Your adapter flashes red and blue.
Pairing is successful when you hear "pairing successful" and "PC connected" and the
Bluetooth USB adapter LED is solid.
Note: To pair again using Plantronics Hub Desktop App, navigate to the app's Poly
BT700 general settings and select "Pair."
Pair mode
Chose from 2 ways to put your earbuds in pair mode.
•
On your charge case touch screen, select Bluetooth > Pair Device. You hear
"pairing."
• Press and hold your earbud button for 4 seconds until you hear "pairing."
11
To Next Page
Loading...
