Connect and pair
Pair to mobile device
1 Remove the earbuds from the charge case to power on.
2 Chose from 2 ways to put your earbuds in pair mode.
•
On your charge case touch screen, select Bluetooth > Pair Device. You hear
"pairing."
• Press and hold your earbud button for 4 seconds until you hear "pairing."
3 Activate Bluetooth
®
on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android
™
Settings > Bluetooth: On > Scan for devices*
Note: * Menus may vary by device.
4 Select " Poly VFree 60 Series."
When your earbuds are successfully paired, you hear “pairing successful” and "phone
connected."
Connect to PC
Your Bluetooth USB adapter provides the best connection, softphone functionality and
acoustic sound quality through your headset. The adapter comes pre-paired to your
headset.
1 Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
9
To Next Page
Loading...
