Page 15 of 20
March 2024
PJN3 SERIES
RECIRCULATING FLUSH
instructions for use
Follow these instructions for setting up your portable restroom:
Step 1
– Charge the tank – this refers to filling the waste tank with approximately 5 gallons (19 liters) of fresh water. The tank must be charged
with fresh water first. Charging the tank will allow deodorizers (once added) to be activated.
Step 2
– Add deodorizers to waste tank – This is a critical step. These deodorizers help to break down the waste and relieve the smell.
Deodorizers added to the waste tank will dissolve in the water charge. These deodorizers are most always dyed blue. In the portable toilet
industry the deodorizers are often referred as just that – blue. Deodorizers come in a variety of forms: pucks, packets, and liquid. They also come
in a variety of scents. To find out more information on deodorizers PolyJohn offers visit https://www.polyjohn.com/supplies/pros-choice.html or
call 800-292-1305 to speak to a representative.
-
Note: Amount of deodorizer used depends on what form you purchase and its use.
– To get rid of the waste in your tank you must call your local portable restroom operator to vacuum out the waste, or if tank is equipped
with dump valve, by bringing it to a local RV dump site or waste treatment plant.
This concludes standard restroom set up. Your restroom is ready for use. For restrooms with options such as sinks & flushable tanks follow the
below instructions accordingly:
Restroom with Sink – The gray water from the sinks is designed to empty into the waste tank. Water capacity of sinks varies. Visit the PolyJohn
website at https://www.polyjohn.com/products/sinks.html to find your sink. Under the specifications tab on each product page it will tell
you the sink capacity.
- To open the PJN3 and Fleet sink either insert a small tool in the hole in the front of the sink where the sink bowl &
tank meet, or press firmly in this area. This will release the metal latch to lift the lid. The sink can be filled from that
opening.
- For the Single User Wash Station there is a port hole to fill with fresh water.
- To completely empty your sink there is a drain port at the bottom.
- For pictures, videos, and manuals for each sink visit https://www.polyjohn.com/products/sinks.html and find
your sink.
Fresh Flushing Tank Option
– Fresh flushing tank options always require a sink. The flushing capability of the bowl draws fresh water from
the sink to flush. Follow the instructions above to find the water capacity of your sink.
– PolyJohn’s own designed liquid soap dispenser can be filled with any non-foaming liquid soap. Just twist the lid and fill with
your liquid soap.
– PolyJohn offers a foaming hand sanitizer dispenser. Specially designed hand sanitizer refill packets are required for this
dispenser. You can find them by visiting https://www.polyjohn.com/supplies/pros-choice.html.
– PolyJohn’s paper towel dispenser can be filled with either folding towels, or rolls. The recommended towels are
Tork Universal Hand Towel Roll (Item# RK350A) or Georgia-Pacific Envision
®
Singlefold Towels (item # GP-23504).
– PolyJohn offers a 2 roll dispenser, or a 3 roll dispenser. The dispenser rod is designed for small
core toilet paper rolls, but can work with standard rolls if desired. PolyJohn offers its own line of toilet paper. Please visit
https://www.polyjohn.com/pros-choice-tp for more information.
For more information including pictures, videos, and documents for each product please visit www.polyjohn.com. You can also call
800-292-1305 and talk to one of our customer service representatives.
To Next Page
Loading...