regulations
REACH Compliance
We certify that all components of the PolyJohn PSW3-1000 conform to REACH standards.
Specifically, we cite Article 7 of the Standard which indicates as follows:
Article 7(1) requires Producers and Importers of products to register with the ECHA chemical substances that are intentionally released from
the products during use.
-No chemical substances are intentionally released from the product during use.
Article 7(2) requires Producers and Importers of products to notify the ECHA of the content of Substances of Very High Concern (SVHCs) if the
concentration of SVHC is above 0.1% weight by weight (w/w) and the total amount put on the EU market by the subject company is more than
1 ton a year.
-No SVHC’s exist in concentrations above 0.1% weight to weight (w/w) in the product.
We will maintain adequate documentation of this certification for inspection upon request.
Reduction of Toxics in Packaging
We certify that all packaging and packaging components comply with the requirements of the toxics
in packaging law(s). Specifically: U.S. Toxics in Packaging Clearinghouse Standard and/or The
European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging
waste last amended by Directive 2018/852.
1) We certify that the regulated chemicals – lead, mercury, cadmium, and hexavalent chromium were not intentionally added to any package
or packaging component during the manufacturing process.
2) We further certify that the sum of the incidental concentration levels of lead, mercury, cadmium and hexavalent chromium present in any
package or package component does not exceed acceptable levels of parts per million by weight.
3) We further certify that no materials used to replace the regulated chemicals are present in a quantity or manner that creates a hazard as great
as or greater than the hazard created by the regulated chemicals.
4) We will maintain adequate documentation of this certification for inspection upon request.
To Next Page
Loading...