Light indications on the TexJet
• IN button led indication
o When ON you can press it to send tray inside
o When OFF the button is off
o When flashing then you need to wait for ready to do the manual
startup (works only if the startup cannot be recognized
automatically)
• ON led light indication
o When ON control panel is available
o When OFF device is switched off
o When FLASHING the printer is busy
o When blinking slowly the printer is in DEBUG mode. Printer is off
• C/P led light indication
o When ON many copies in the spool
o When FLASHING FAST the 10sec after pressing the F button
didn’t exceeded
o When FLASHING SLOW the F1 function is enabled and there are
no copies
o When OFF the F1 function is disabled and there are no copies
To Next Page
Loading...
