SAFETY
INFORMATION
02
Ensure your work area is clean and well-lit. Make sure floors are not slippery.
Protect the unit from dust, dirt, and moisture.
The compressor must always be secured on a wall-mounted, fan-cooled shelf
or in a fan-cooled post-mount cabinet.
Keep the compressor at least 18 inches away from walls or objects that
could restrict cooling air flow.
Work Area Safety
This compressor is designed for air only. Do not allow corrosive
gases or particulate material to enter the compressor. Water vapor,
oil-based contaminants, or other liquids must be filtered out.
To prevent overheating, use forced fan cooling in a ventilated building.
Ambient temperature should not exceed 40ºC (104ºF). For operation
above this temperature limit, consult factory.
Do not pump flammable or explosive gases or operate
compressor in an atmosphere containing these types of gases.
This compressor is not equipped for and should not be used
to supply breathing air.
Close supervision is necessary when any appliance is used
by or near children.
Always disconnect the compressor and power supply before
making adjustments, when servicing, or when not in use.
CA-series compressor
Pressure release valve
Hose barb
Anti-vibration rubber feet & nuts
Filter assembly & filter
To Next Page
Loading...