07
If this compressor is for use on a 120
volt circuit and has a grounding plug
similar to that shown. Only connect
compressor to an outlet having the
same configuration as the plug.
Do not use an adapter with this compressor.
Improper installation of grounding plug may result in a risk of electric
shock. When repair or replacement of cord or plug is required, do not
connect the grounding wire to either flat blade terminal. The insulated
wire with an outer surface that is green (with or without yellow stripes)
is the grounding wire.
Specifications
SAFETY
INFORMATION
BEFORE
OPERATING
Maximum Working Pressure
50 psig
Pressure Restart Capability 0 psig (all pressure must be released from
outlet air line to start the compressor.
Pressure restart capability is optional
with this compressor.)
Air Delivery
Refer to airflow data (p. 10)
Lubrication None — oil free
Electrical Input
Dual voltage motors 120V/240V, 60Hz,
Single Phase, AC. Refer to amp data (p. 10)
Min. Circuit Requirement
15A
Net Weight
18 lbs.
Duty Cycle
100%
To Next Page
Loading...