Need help?Do you have a question about the Pool Technologie JUSTSALT DUO and is the answer not in the manual?
General| Brand | Pool Technologie |
|---|---|
| Model | JUSTSALT DUO |
| Category | Water Filtration Systems |
| Language | English |
General guidelines and warnings for safe installation and operation of the device.
Specific warnings and measures to prevent electrical hazards during use and installation.
List of components included with the Uno model of the salt chlorinator.
List of components included with the Duo model of the salt chlorinator.
List of components included with the Pro model of the salt chlorinator.
Key points to check before starting device installation and general installation guidelines.
Diagram illustrating the installation layout for the Uno model of the salt chlorinator.
Instructions for selecting a location and installing the controller box.
Step-by-step guide for installing the chlorination cell horizontally and connecting it.
Guidelines for horizontally mounting the accessory holder before the chlorinator cell.
Procedure for plugging and screwing the salt/temperature/no water sensor into its holder.
Steps to connect the device to an automatic pool cover's limit switch.
Instructions for installing the optional grounding electrode for static electricity evacuation.
Details on connecting the pH probe, suction strainer, and injection circuit components.
Procedure for installing the redox probe on the pipe and connecting its cable.
Diagrams showing connections for Uno and Duo/Pro models to the controller box.
Description of the control panel buttons and display for setting parameters.
Configuration settings for salt chlorination, including polarity inversion and pool cover function.
Configuration menu for pH regulation in Duo models, including calibration and corrective agent settings.
Configuration menu for redox regulation in Pro models, including calibration and corrective agent settings.
Explanation of how to navigate and display information on the Uno model's screen.
Explanation of how to navigate and display information on the Duo model's screen.
Explanation of how to navigate and display information on the Trio model's screen.
Essential water parameters (pH, temperature, chlorine, TAC, TH) to check for optimal device performance.
Guidance on the ideal salt concentration and how to add salt to the pool.
Procedure for adjusting chlorine production percentage based on pool volume and temperature.
Explanation of how the device controls salt chlorinator production based on redox potential (ORP).
Instructions for preparing the device for winter, including automatic winter mode and probe care.
Steps for manual cleaning of the chlorination cell if scale deposits are present.
Procedure for calibrating the pH probe using pH 7 and pH 10 standard solutions.
Procedure for calibrating the redox probe using a standard 470 mV solution.
How to launch and interpret the device's self-diagnosis program for troubleshooting.
Procedure to adjust the displayed temperature reading if there is a discrepancy.
Explanation of the device's protective securities (A1, A2, A3, A4, Hi) and their causes/remedies.
Information on pH regulation securities (pH value flashing, 'AL' message) and their causes/remedies.
Details on redox regulation securities (value flashing, A5, A6) and their causes/remedies.
Details on warranty duration, purpose, after-sales service, and return costs.
Information on what the warranty does not cover, including installation and damage issues.
How to apply for warranty service and the legal framework governing the warranty.
To Next Page
