Need help?Do you have a question about the Pool Technologie JUSTSALT UNO and is the answer not in the manual?
General| Brand | Pool Technologie |
|---|---|
| Model | JUSTSALT UNO |
| Category | Water Filtration Systems |
| Language | English |
Warns about electrical hazards during installation and use, emphasizing precautions.
Details how to choose a location and connect the controller box safely.
Explains how to install the cell horizontally, including on-line and T-cell types.
Describes how to install the accessory holder horizontally and its orientation.
Guides on plugging and tightening the salt/temperature sensor correctly.
Explains how to connect the pool cover limit switch to the controller box.
Details how to install the optional grounding electrode for static electricity evacuation.
Describes connecting the pH probe, suction strainer, and injection pump.
Details how to install the redox probe on the pipe saddle and connect its cable.
Shows how to connect sensors and probes to the Uno and Duo/Pro controller boxes.
Explains the control panel layout for Uno and Duo/Pro versions and navigation.
Details the Salt Chlorination Menu for adjusting polarity inversion, pool cover function, and forced march.
Covers manual injection, calibration, corrective agent type, pool volume, and pH adjustment.
Covers forced march, calibration, corrective agent type, and redox/pH adjustment.
Illustrates the display flow for production, temperature, and boost function.
Shows the display flow for pH reading, flashes, and manual injection.
Depicts the display flow for redox active mode, redox value, and pH value.
Details essential water parameters like state, temperature, pH, TAC, and TH for optimal function.
Provides guidelines on ideal salt concentration and quantity to add based on pool volume.
Explains how to adjust chlorine production percentage based on free chlorine levels and temperature.
Discusses controlling salt chlorinator production via redox potential (ORP) and water quality.
Provides instructions for winterizing the device, including automatic winter mode and probe care.
Details the process for manual cleaning of the chlorination cell due to scale deposits.
Guides on calibrating the pH probe using pH7 and pH10 standard solutions.
Explains how to calibrate the redox probe using a standard 470 mV solution.
Describes how to launch the self-diagnosis program and interpret error codes (E0, E1, E2).
Explains how to adjust the displayed temperature reading on the device.
Lists general device protections and associated causes/remedies (A1, A2, A3, A4, Hi).
Details pH value flashing and "AL" message causes/remedies for the Duo model.
Explains redox value flashing, regulation securities (A5), and pH influence (A6) for the Pro model.
Specifies warranty periods, scope, and conditions for normal family pool use.
Outlines repair procedures, costs, shipping responsibilities, and important claims information.
Details what is not covered by the warranty, including installation, misuse, and unauthorized parts.
Provides contact information for warranty applications and specifies governing laws and dispute resolution.
To Next Page
