To Next PageTo Next Page
Need help?Do you have a question about the PoolPak R-410A AW Series and is the answer not in the manual?
General| Brand | PoolPak |
|---|---|
| Model | R-410A AW Series |
| Category | Dehumidifier |
| Language | English |
General overview of indoor pool design principles and considerations.
Analysis of energy consumption factors in pool facilities.
Covers moisture, IAQ, comfort, and water chemistry for indoor pools.
Discussion of various methods for pool environment control.
Principles for supply air, return air, and ductwork design.
Additional factors for air distribution and building envelope.
How the system removes moisture and recycles heat.
Microprocessor control for humidity, temperature, and water temperature.
Networking, cooling, heating, options, RoofPak, and selection.
Performance summaries for AW/AWH and HCD series models.
Physical dimensions, hot water coil capacities, and damper sizes.
Refrigerant charge, ACC performance, and duct heater details.
Covers unit placement, handling, mounting, inspection, power, and wiring.
Details on curb mounting, gas furnace option, and ECC-PCP field wiring.
Installation of various sensors and optional systems like economizers.
Pool water piping, condensate drains, and water-cooled condensers.
Location, spacing, and field installed piping for ACC units.
Using the RIU for status display and set point changes.
Purge mode, detailed status, history, manual mode, and utilities.
Network operation, configuration, and service menu access.
Wiring for auxiliary air and pool water heaters for single, multiple, and two-pool installations.
Detailed diagrams for connecting sensors, controls, and systems to the unit.
