8
1.3. CONSERVATION SUBSTANCES
The acrylic surface of the bath is covered with a thin layer of wax, being the remaining of the
polishing process. Metallic elements have been coated with silicone oil for protection purposes. The
SPA should be washed off (e.g. with a dishwashing detergent) prior to fi lling the bath with water.
1.4. VENTILATION
High water temperature during bath in the bath (39°C) causes emitting of big amounts of steam.
An effi cient ventilation system should be provided in the room with the bath. Installing of a steam
condenser in the room which will maintain constant air humidity will minimize the risk of dampening
of walls and ceiling. An air-conditioning system in the building allows for elimination of the steam
condenser. Such problem does not exist in case of a bath operating in open air conditions.
1.5. MAIN FUNCTIONS ACCESSIBLE FROM THE ELECTRONIC CONTROL PANEL
Marina SPA control panel
1.5.1. Switching on/off the pump
The hydromassage pump can be switched on/off directly from the electronic control panel. After
starting the pump, this icon
1
, appears on the display and after switching it off, the icon disap-
pears.
With the two-gear pump, pressing the button for the fi rst time switches the pump over to a low gear
(fi ltration; this icon
1
blinks on the display). Pressing the button once again switches the pump over
to a top gear (massage; this icon
1
appears on the display). Pressing the same button again swit-
ches the pump off and the icon disappears from the display.
In some cases, the pump automatically switches over to a low gear after connecting it to the power
supply. This happens during the fi ltration or the water heating process in the SPA bath.
The pump working in massage mode have automatic time out (20 minutes) from the last button
start.
- unavailable
1.5.2. Extra equipment
- airmassage (on/off)
1.5.3. Switching on/off the lighting
Press the button with the lamp symbol on it to switch on the lighting. This icon appears on the
display. Press the same button again to switch off the lighting, and the icon disappears from the
display. The lighting switches off automatically after 2 hours from the last pressing of the lighting
on/off button.
To Next Page
Loading...