EasyManua.ls Logo

poolstar SUP STARPUMP-9 - Environmental and Usage Precautions; Product Integrity and Care

poolstar SUP STARPUMP-9
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
/4
STARPUMP 9
•Warning: If you are standing in a place with water or your hands are wet,
please don’t plug or pull the DC plug.
•Warning: Before inating, please pay attention to check the maximum
bearable pressure of the inatable product, because the air bag may be da-
maged upon exceeding the maximum bearable pressure.
•Warning: Before using, please check the cigarette lighter socket to make sure
that there is no rust or residue inside. The cigarette lighter socket with poor
electric conduction may cause overheating of the pump
•Warning: It is strictly forbidden to place the product in a high-humidity environ-
ment, otherwise the internal circuit of the product might be short-circuited,cau-
sing serious damage to the product.
•Warning: Do not throw this product into re for fear of explosion, battery
leakage or other dangers.
Warning: Do not disassemble or break the product randomly for fear of dama-
ging the product.
•Warning: Avoid keeping or using this product under strong sunlight. Pro-
longed sun exposure will damage the performance of the product, resulting in
overheat and line problems.
•Warning: Do not use or store this product in an environment where the tem-
perature is too low or too high, which might trigger automatic protection of the
product and cut o󰀨 the charging of the digital product.
•Warning: Please use this product in a relatively safe environment, and keep it
away from ammable/explosive liquids, gases or explosives.
•Warning : Before charging this product, please verify that the specications of
the adapter match the product. Incompatible adapters might cause damage to
the product or cause risky overload.
•Warning : When the product is not in use, please put it in a dry and ventilated
place, and prevent it from colliding with metal objects for fear of short circuit.
Please pay attention to heat dissipation and ventilation during use, so as to
avoid danger due to excessive temperature.
•Warning : If product swelling or leakage is found, please stop using this
product.
•Warning : Do not disassemble the device without authorization. This product
does not contain spare parts that can be disassembled/maintained by the
user.
•Warning : Do not cover or obstruct the product with paper or other objects for
fear of a󰀨ecting heat dissipation and cooling of the product.
•Warning : In order to avoid injury or property damage, unplug the power cord
when not using the product.
•Warning : If leakage occurs and the liquid splashes into the eyes accidentally,
do not rub your eyes but rinse your eyes with clean water immediately instead.

Related product manuals