To Next PageTo Next Page
Need help?Do you have a question about the Porkka F 840 and is the answer not in the manual?
Ensure adequate ventilation, heat removal, and levelness (±3 mm/m) for the installation area.
Seal standard floors with mastic to prevent moisture/vermin.
Ensure 90° corners, use plinths, and check dimensions for floorless rooms.
Use correct tools, protective gear, and understand panel lock operation.
Align panels, secure doors, and install roof panels correctly.
Installation of door frame heater plugs, floor heating, and internal lighting.
Mounting the control panel and adjusting door hinges.
Installing shelf supports, pipes, and plates for optimal storage arrangement.
Connecting the unit to the mains supply, verifying voltage, and ensuring separate power.
Setting operational temperatures and understanding basic unit functions.
Using the digital display, keyboard lock, indicator lights, and key functions.
Checking min/max temps, stand-by mode, and defrost procedures.
Utilizing the drying function, monitoring temperature sensors, and understanding alarms.
Guidelines for cleaning, avoiding chemical damage, and performing periodic overhauls.
Troubleshooting common issues like temperature faults, ice buildup, and overload.
Explanations for condenser temp, probe failures, and data/memory alarms.
Proper disposal procedures for the unit, adhering to WEEE waste regulations.
Ensure adequate ventilation, heat removal, and levelness (±3 mm/m) for the installation area.
Seal standard floors with mastic to prevent moisture/vermin.
Ensure 90° corners, use plinths, and check dimensions for floorless rooms.
Use correct tools, protective gear, and understand panel lock operation.
Align panels, secure doors, and install roof panels correctly.
Installation of door frame heater plugs, floor heating, and internal lighting.
Mounting the control panel and adjusting door hinges.
Installing shelf supports, pipes, and plates for optimal storage arrangement.
Connecting the unit to the mains supply, verifying voltage, and ensuring separate power.
Setting operational temperatures and understanding basic unit functions.
Using the digital display, keyboard lock, indicator lights, and key functions.
Checking min/max temps, stand-by mode, and defrost procedures.
Utilizing the drying function, monitoring temperature sensors, and understanding alarms.
Guidelines for cleaning, avoiding chemical damage, and performing periodic overhauls.
Troubleshooting common issues like temperature faults, ice buildup, and overload.
Explanations for condenser temp, probe failures, and data/memory alarms.
Proper disposal procedures for the unit, adhering to WEEE waste regulations.
General| Brand | Porkka |
|---|---|
| Model | F 840 |
| Category | Refrigerator |
| Language | English |
