102 Air Conditioning, Parking Heater and Heated Rear Window
E - Parking ventilation symbol
F -ON time symbol
G -Memory symbol
H -ON time
I - Parking heating symbol
Programming the parking heater
The parking heater has three independent
memories for programming the ON times. The
ON time, together with the associated parking
heating or parking ventilation function, can be
programed in each memory.
Complete programming of the parking heater
requires definition of the
–Function and
–ON time.
Programming function
1. Switch ignition off.
2. Press TIMER button on the front
air-conditioning control panel.
The symbols for the parking heating I or par-
king ventilation E function flash on the display.
3. Select function.
Press button for parking heating
or button for parking ventilation.
If no other entry is made within 10 seconds, the
display returns to its initial status.
However, the selected function is retained and is
activated when the parking heater is next turned
on.
f For further information on switching parking
heater on and off:
Please observe the chapter “SWITCHING PAR-
KING HEATER ON AND OFF” on Page 101.
To Next Page
Loading...
Need help?
General
