Multi-Purpose Display and Instruments 169
Setting lighting off delay
You can set the duration the lights remain on after
the vehicle is locked.
Setting the clock
Note on operation
There is also a button on the instrument panel to
call the CLOCK menu:
f Please observe the chapter “CLOCK” on
Page 143.
1. MAIN MENU
>SETTINGS
> LIGHTS
Select and confirm.
2. Select OFF DELAY.
3. Confirm selection.
The set off delay time is now
active.
4. Select the time input field.
5. Confirm selection.
6. Set the off delay time (Coming Home
function):
The time is adjusted by pressing the
rocker switch. Delay times of 15, 30
or 60 seconds can be set.
7. Confirm selection.
1. MAIN MENU
>SETTINGS
> CLOCK
Select and confirm.
2. Select xx:xx SET.
3. Confirm selection.
4. Select hours or minutes display.
5. Confirm selection.
The desired time can now be set.
6. Set the desired time:
The time is adjusted in hour or minute
increments by pressing the rocker
switch.
7. Confirm selection.
Selecting 12 h mode
8. Select 12 h-MODE.
9. Confirm selection.
12 h mode is activated
12 h mode is deactivated