112 Windows and Sliding Roofs
A - Closing sliding/lifting roof completely
f Turn knob to switch position A.
Note on operation
The sliding/lifting roof is equipped with a force
limiter. If the sliding/lifting roof is obstructed
during the closing process, the sliding/lifting roof
opens again immediately.
Using the force limiter to close the sliding/
lifting roof
f Remove the obstruction.
f Turn knob to position A again.
B - Opening sliding/lifting roof to comfort
setting
f Turn knob to switch position B.
The sliding/lifting roof opens in switch position B
until it reaches the best position relative to noise.
It can be opened fully, however, if you continue to
turn the switch beyond the limit to position C.
C - Opening sliding/lifting roof completely
f Turn knob beyond stop position B to switch po-
sition C.
This requires a somewhat greater effort.
Once released, the knob rebounds to position
B.
D - Lifting sliding/lifting roof
f Turn knob between switch positions A and D
until it reaches the required position. The roof
is lifted completely in switch position D.
Comfort function on vehicles without
Porsche Entry & Drive
Closing the sliding/lifting roof
f Hold the vehicle key in the door lock in the
locking position until the windows and the
sliding/lifting roof have reached the desired
position.
Comfort function on vehicles with
Porsche Entry & Drive
Closing the sliding/lifting roof
f Hold the car key in the door lock in the locking
position until the windows and the sliding/
lifting roof have reached the desired position
or
f Hold the button in the door handle when lock-
ing the vehicle until the windows and the slid-
ing/lifting roof have reached the desired posi-
tion.