238 Luggage Compartment, Loadspace and Storage
8. Insert headrest into the receiver in the seat
cushion.
Positioning rear seats
1. Remove the headrests from the seat cushion.
2. Make sure that the safety belts are not
trapped.
Raise the backrest until it locks with an audible
click.
The red “verification flag” A must be lowered
completely.
3. Fold seat cushion forward.
4. Push seat cushion under the backrest.
5. Press seat cushion downward at the front.
Make sure that the buckles are accessible.
6. Insert the headrests into the backrest.
Therefore:
Please observe the chapter “HEADRESTS” on
Page 46.
To Next Page
Loading...
