Minor Repairs 391
Height adjustment for low beam/
high beam and additional high beam
1. Switch ignition on.
2. Switch on low beam and/or high beam.
3. Open engine compartment lid.
4. Place allen key (6 mm) on adjusting screw.
5. Adjust low beam in direction of the arrow.
Changing headlights from left to
right-hand traffic
If you travel to a country where traffic uses the
other side of the road, the headlights must be
repositioned when you cross the border. The
dipped beam then lights symmetrically and drivers
of oncoming vehicles are not dazzled.
On the return journey, do not forget to readjust the
headlights.
Repositioning headlights
1. Please observe the chapter “REMOVING
HEADLIGHTS” on Page 377.
Remove headlight. Press down both release
tabs A and remove cover.
To Next Page
Loading...
Need help?
General
