66 Seats, Mirrors and Steering Wheel
Door mirror heating
The door mirror heater is ready for operation
when the ignition is switched on.
Switching on
f Turn control switch to B.
Both door mirrors are heated.
Switching off
f Change the position of the control switch.
Storing door mirror settings
On vehicles with seat memory, individual door mir-
ror settings can be stored on the person buttons
of the seat memory and vehicle keys and recalled
with these.
f Please observe the chapter “FRONT SEAT
WITH MEMORY” on Page 42.
f Please observe the chapter “STORING PAS-
SENGER MIRROR SETTING AS A PARKING AID”
on Page 43.
A - Control switch for door mirror adjustment
C - Passenger mirror setting
Swivelling down mirror glass as parking
aid
When reverse gear is engaged, the mirror glass
on the passenger's side swivels down slightly to
show the curb area.
Preconditions
– Vehicle must be equipped with seat memory.
– Control switch A must be turned to position C
(passenger mirror’s setting).
– Reverse gear must be engaged.
Moving mirror glass to its initial position with
reverse gear engaged
The mirror glass swivels to its initial position when:
– The car is shifted out of reverse gear or
f The position of the control switch for the door
mirror setting is changed.
To Next Page
Loading...
Need help?
General
