Port A Cool PAC2K363S User Manual

40 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Owners Manual

READ AND SAVE

THESE INSTRUCTIONS

Port-A-Cool, LLC

P.O. Box 2167 • 709 Southview Circle • Center, TX 75935

Phone 936-598-5651 • 800-695-2942

www.port-a-coolllc.com

Port-A-Cool® Products and Accessories

and

KÜÜL® Pads Cooling Media

are manufactured by

PAC-ACC-03 04132011

®

Includes

Port-A-Cool Cyclone

™

Port-A-Cool JetStream

™

Questions and Answers:

J
Jonathan KramerSep 2, 2025
Why is my Port A Cool Freezer overflowing or spitting water?
- D
  Daniel Good Jr.Sep 2, 2025
  If your Port-A-Cool Freezer unit overflows from the sump tank or is spitting water through the fan, the float valve hose might be loose at the bulkhead fitting or at the float valve; tighten the connections and/or replace the hose washers. Alternatively, the water pressure might be too high, preventing the float valve from shutting off (50 psi max.); reduce the water pressure by checking the in-line reducer. It's also possible that the float valve isn't seating properly; check for particles in the valve and replace the float valve if needed. Finally, adjust the spray bar valve to reduce excess water flow.
S
Sean MasonSep 1, 2025
Why is my Port A Cool Freezer fan motor humming but not running?
- L
  lopeznicholasSep 1, 2025
  If the fan motor of your Port A Cool Freezer won't run and makes a humming sound, it could be that the blade is in contact with the shroud. Check the mounting bolts. Alternatively, the motor might be stalled (will not turn by hand), in which case you should replace the motor.
D
Diane PerezAug 31, 2025
Why is my Port A Cool Freezer leaking water on the floor?
- M
  Mikayla RhodesAug 31, 2025
  If the floor at the side of your Port-A-Cool Freezer is wet, the water inlet hose might be loose at the supply hose or at the bulkhead fitting. Try tightening the connections and/or replacing the hose washers.
M
Maria WilliamsAug 30, 2025
What to do if my Port A Cool Freezer pump motor hums but doesn't pump water?
- A
  Alexandra KruegerAug 30, 2025
  If the pump motor of your Port A Cool Freezer hums when the switch is turned on but doesn't pump water, there might be an object jammed into the impeller blade; try removing the object and priming the pump. Alternatively, the pump/motor might be air locked, in which case you should replace the pump/motor.
L
lmillerAug 29, 2025
Why does the breaker trip when I turn on my Port A Cool Freezer pump?
- J
  Jennifer PalmerAug 29, 2025
  If the breaker trips or the fuse blows when you turn on the switch of your Port A Cool Freezer, it could be due to a wiring short in the line between the pump and the switch box. You should check and replace the wiring if necessary.
K
kyle99Aug 27, 2025
How to troubleshoot a Port A Cool Freezer pump that won't turn on?
- A
  Alexander WhiteAug 27, 2025
  If the pump of your Port A Cool Freezer will not run when the switch is turned on, the issue might be with the power cord, extension cord, switches, circuit breaker, switch box, or connections. Try reconnecting the power or extension cord, resetting the breaker, or reconnecting in the switch box.
J
James SextonAug 27, 2025
Why is my Port A Cool Freezer pump cycling on and off?
- L
  Lisa TaylorAug 27, 2025
  If the pump in your Port A Cool Freezer is cycling on and off periodically, it could be due to a few reasons. The extension cord gauge might be too small, so replace it with a minimum 12-gauge cord. Alternatively, the sump tank might be empty, so fill it with water. Lastly, the spray bar valve might be closed; open the valve.
M
Melissa SotoAug 25, 2025
Why does my Port A Cool Freezer motor overheat and shut off?
- P
  Patrick BlackAug 26, 2025
  If your Port A Cool Freezer's motor is overheating, shutting off, and then restarting, it could be due to several reasons. One possibility is that the extension cord gauge is too small; replace it with a 12-gauge cord. Another reason might be obstructed inlet air or the unit being too close to a wall; ensure a minimum of 36 inches of inlet clearance. Finally, the motor itself could be faulty, requiring a replacement.
B
Brittany EspinozaAug 22, 2025
Why does the breaker trip when I start my Port A Cool Freezer?
- J
  Jared StevensAug 22, 2025
  If the breaker trips or the fuse blows when starting your Port A Cool Freezer, it could be due to a motor stall, in which case you should replace the motor. Another possible cause is too many items on the circuit; try removing some of them.
L
Lisa GarciaSep 15, 2025
Why is my Port A Cool Freezer drain valve leaking?

Port A Cool PAC2K363S Specifications

General

Brand	Port A Cool
Model	PAC2K363S
Category	Air Conditioner
Language	English

Summary

Safe Operation

General Safety Warnings

Read and follow all safety instructions to reduce the risk of electric shock, fire, or injury.

Setup

Unpacking and Connections

Instructions for unit unpacking and connecting water and electrical supply.

Operating Procedures

Unit Placement and Start-up

Guidelines for unit placement, starting the pump, and fan operation.

Specifications and Adjustments

Information on unit specifications and adjusting water flow for optimal cooling.

Maintenance & Storage

Routine Maintenance and Storage

Procedures for daily/weekly upkeep, cleaning, and proper unit storage.

Technical Support

Contact information for technical assistance and service.

Warranty and Replacement Parts

Unit Limited Warranty

Details of the warranty coverage for PORT-A-COOL units and component parts.

Replacement Parts and RMA

Information on purchasing parts, warranty claims, and return procedures.

Wiring Diagrams

Wiring Diagrams by Speed Type

Electrical schematics for two-speed, variable speed, one-speed, and three-speed models.

Unit Operation Warnings & Overviews

Unit Operation Warnings

Important safety warnings regarding the intended use and operation of the unit.

Model Overviews

Visual guides and labels for various PORT-A-COOL models.

Troubleshooting / Repair

Troubleshooting and General Repair

General approach to problem diagnosis and step-by-step repair instructions.

Component Specific Troubleshooting

Problem-solving for specific components like fans, pumps, spray bars, and water systems.

Frequently Asked Questions

Key FAQs (Assembly, Storage, Performance)

Answers to common questions about assembly, storage, and unit performance.

Maintenance, Parts, and Technical FAQs

FAQs regarding maintenance, parts purchasing, and technical details.

Unit Operation and Support FAQs

FAQs on unit operation, moisture output, water supply, and contacting support.

Related product manuals

Port A Cool PAC2K361S

Port A Cool PAC2K36HPVS

Port A Cool PAC2K36HP220-60

Port A Cool PAC2K163SFC

Port A Cool PAC2K24HP220-50

Port A Cool PAC2K24HP220-60

Port A Cool PAC2K481S220-50

Port A Cool PAC2K161FC22050

Preview: Cyclone 3000 PAC2KCYC01

Cyclone 3000 PAC2KCYC01

Preview: Port A Cool Port-A-Cool

Port A Cool Port-A-Cool