QUICK SET UP
Remove box and palette Position product on level surface Plug into appropriate outlet
Fill sump or attach water hose
Fill the tank, then turn on the pump switch and the fan.
For setup, pads should appear wet before starting the
fan. Check the water gauge to monitor water level in
tank.The water ow valve on each unit is set at max
ow. However, ensure the knob is turned completely
to the left before use. Turn to the left to increase water
ow. Less water is required for cooling in more humid
environments.
Models: PAC2KCYC01, PAC2KCYC01A,
PACCYC02, PACCYC02A, PACCYC03,
PACCYC03A, PACCYC04, PACCYC04A
Models: PACCYC06
1 2 3 4
5
To Next Page
Loading...
