Porter-Cable 3812 User Manual

ESPAÑOL: PÁGINA 23
FRANÇAISE : PAGE 43
Double Insulated
10" Bench Top Table Saw
Instruction
Manual
Part No. 912933 - 09-15-03
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. _____________________________________
Type __________________________________________
Serial No.______________________________________
IMPORTANT
Please make certain that the person who is to use
this equipment carefully reads and understands
these instructions before starting operations.
MODEL 3812
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2003 PORTER-CABLE Corporation
Shown assembled with accessory stand model 38129
and accessory outfeed support model 38239.

Porter-Cable 3812 Specifications

General

Brand	Porter-Cable
Model	3812
Category	Saw
Language	English

Summary

Product Information and Initial Setup

Product Title: Double Insulated 10" Bench Top Table Saw

Identifies the main product described in the manual.

Model Identification: MODEL 3812

Safety Guidelines and Definitions

Safety Alert Symbol Definitions

Explains the meaning of DANGER, WARNING, CAUTION symbols.

General Safety Rules and Precautions

Core principles for safe operation, personal protection, and responsibility.

Machine Usage and Modification Warnings

Advice on proper machine application and modification risks.

Additional Safety Rules

Personal Safety and Equipment Use (Rules 1-12)

Covers personal attire, work area, tool maintenance, and safe operation practices.

Operational Safety and Precautions (Rules 13-24)

Details on workpiece handling, avoiding kickback, and general awareness.

Further Safety Rules and Resources

Safe Saw Operation Practices (Rules 1-9)

Focuses on guards, kickback prevention, and workpiece handling.

Operational Safety and Maintenance (Rules 10-22)

Covers workpiece guidance, avoiding hazards, and proper shutdown.

Power and System Specifications

Power Connections and Electrical Requirements

Details circuit, extension cord usage, and voltage needs.

Motor Operation and Compatibility

Assembly Instructions

Installing the Blade Raising Handwheel

Assembling the Blade Guard and Spreader

Assembly and Component Installation

Adjusting the Blade Guard Spreader Alignment

Operating Controls and Adjustments

Starting, Stopping, and Soft Start Feature

How to turn the saw on/off and understanding the soft start function.

Locking the Power Switch

Blade Height and Tilt Controls

Instructions for raising/lowering and tilting the saw blade.

Precision Adjustments and Fence Operation

Setting 0 and 45 Degree Blade Stops

Steps to adjust positive stops for accurate bevel angles.

Rip Fence Alignment and Adjustment

Rip Fence Adjustments and Extensions

Rip Fence Parallelism Check and Adjustment

Miter Gage, Blade Alignment, and Dust Port

Miter Gage Operation and Index Stops

Ensuring Blade Parallelism to Miter Slots

Procedure to check and adjust the blade's alignment with table slots.

Saw Operations: Cross-Cutting and Ripping

Cross-Cutting Techniques with Miter Gage

Step-by-step guide for performing cross-cuts using the miter gage.

Ripping Techniques with Rip Fence

Detailed instructions for safe and effective ripping operations.

Advanced Sawing Techniques

Using Push Sticks for Narrow Rips

Guidance on using push sticks for feeding narrow workpieces.

Dado Head Usage and Safety

Instructions and warnings for using dado heads, including blade limitations.

Dado Head Operation and Storage

Dado Head Assembly and Operation

Bevel Position Warning for Dado Heads

Maintenance and Servicing

Changing the Saw Blade

Step-by-step instructions for safely replacing the saw blade.

Brush Inspection and Professional Servicing