EasyManua.ls Logo

Porter-Cable 6 IN. (150 MM) VARIABLE SPEEDGRINDER WITH WORKLIGHT - User Manual

Porter-Cable 6 IN. (150 MM) VARIABLE SPEEDGRINDER WITH WORKLIGHT
64 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
CATALOG NUMBER
PCB525BG
Instruction Manual
Manuel d’instructions
Manual de instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS
DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
N
O
F
F
O
L
H
6 IN. (150 MM) VARIABLE SPEED
GRINDER WITH WORKLIGHT
MEULE À VITESSE VARIABLE DE
150 MM (6 PO) AVEC BALADEUSE
AMOLADORA DE VELOCIDAD
VARIABLE DE 150 MM (6 PULG.)
CON LUZ DE TRABAJO

Table of Contents

Questions and Answers

  • A
    Alyssa MedinaAug 6, 2025
    Why is my Porter-Cable 6 IN. (150 MM) VARIABLE SPEEDGRINDER WITH WORKLIGHT motor not running?
    • L
      Larry SmithAug 6, 2025
      There are several reasons why your Porter-Cable Grinder motor might not be running. First, make sure it's properly plugged into a working power outlet. Next, verify that the switch and key are in the ON position. If the issue persists, check the fuse on the circuit and reset it, keeping in mind there may be too many machines on the same line. If these steps don't resolve the problem, the motor cord or plug might be faulty, or the motor itself could be damaged, requiring professional repair or replacement.

Porter-Cable 6 IN. (150 MM) VARIABLE SPEEDGRINDER WITH WORKLIGHT Specifications

General IconGeneral
Power SourceCorded Electric
Wheel Diameter6 in
Variable SpeedYes
LightYes
Amperage5.5 Amps
Spindle LockYes
Voltage120V
Corded/CordlessCorded
Wheel Arbor Size5/8 in

Related product manuals