What to do if my Porter-Cable PCX18604P-12A/8101261 loses suction when wet picking up?
If your Porter-Cable Vacuum Cleaner loses suction during wet pick-up, several factors could be responsible. Check if the tank is full and needs draining and cleaning. Also, inspect the hose for any clogs and remove any obstructions. Lastly, examine the filter to see if it's clogged, and clean or replace it as needed.
Why is my Porter-Cable PCX18604P-12A/8101261 losing suction when dry picking up?
If your Porter-Cable Vacuum Cleaner loses suction during dry pick-up, there are several potential causes. First, the tank might be full, in which case you should drain and clean it. Second, the hose could be clogged; remove it and clear any debris. Finally, the filter may be clogged, requiring cleaning or replacement.
General| Brand | Porter-Cable |
|---|---|
| Model | PCX18604P-12A/8101261 |
| Category | Vacuum Cleaner |
| Language | English |
Guidelines for servicing double-insulated vacuums, emphasizing safety and qualified personnel.
Step-by-step guide for unpacking the vacuum and preparing it for initial use.
Instructions on how to assemble the caster dolly and accessory holder.
Steps for correctly installing the disposable filter bag for dry collection.
Instructions for wet pick-up, including filter removal and float mechanism operation.
Guide on how to use the vacuum's blowing feature, including safety precautions.
Instructions on replacing, cleaning, and checking the vacuum filter for optimal performance.
Procedures for cleaning the exterior and interior of the wet/dry vacuum.
Guidelines for properly storing the vacuum cleaner and its accessories.
To Next Page
