To Next PageTo Next PageWhy is my Porter-Cable Vacuum Cleaner losing suction during dry pick-up?
If your Porter-Cable Vacuum Cleaner loses suction during dry pick-up, there are a few potential causes. First, the tank might be full, in which case you should drain and clean it. Second, the hose could be clogged; remove it and clear any debris. Finally, the filter might be clogged, so try cleaning or replacing it.
Why is my Porter-Cable PCX18115 losing suction during wet pick-up?
If your Porter-Cable Vacuum Cleaner loses suction during wet pick-up, it might be due to a few reasons. First, check if the tank is full and drain and clean it if necessary. Second, the hose may be clogged, so remove it and clear any obstructions. Third, the filter could be clogged, so try cleaning or replacing it.
General| Model | PCX18115 |
|---|---|
| Type | Wet/Dry Vacuum |
| Peak Horsepower | 6.5 HP |
| Voltage | 120V |
| Cord Length | 10 feet |
| Hose Length | 7 feet |
| Hose Diameter | 2.5 inches |
Crucial safety warnings and instructions regarding the servicing of the vacuum.
Steps for unpacking the vacuum and summarizing the initial setup process.
Instructions for effective dry material collection and filter considerations.
Detailed guide on how to correctly install the disposable filter bag.
Guidance for liquid collection, including float mechanism operation.
Instructions on how to use the vacuum cleaner's blowing feature.
Guidelines for replacing, cleaning, and inspecting vacuum cleaner filters.
Instructions for cleaning the exterior and interior of the vacuum cleaner.
Proper procedures for storing the vacuum cleaner after use.
