To Next PageTo Next PageWhy is my Porter-Cable PCX18125P Vacuum Cleaner losing suction during dry pick-up?
A loss of suction during dry pick-up with your Porter-Cable Vacuum Cleaner could be due to several reasons: * The tank might be full, so you should drain and clean it. * The hose could be clogged; remove the hose and clear any debris. * The filter might be clogged; clean or replace the filter.
What to do if my Porter-Cable PCX18125P Vacuum Cleaner loses suction when picking up wet materials?
If your Porter-Cable Vacuum Cleaner loses suction while picking up wet materials, it could be caused by: * A full tank. To resolve this, drain and clean the tank. * A clogged hose. Remove the hose and clean out any debris. * A clogged filter. Clean or replace the filter.
General| Model | PCX18125P |
|---|---|
| Type | Wet/Dry Vacuum |
| Peak HP | 6.5 HP |
| Voltage | 120V |
| Included Accessories | crevice tool |
| Filter Type | Cartridge |
Covers fundamental safety rules, dangers, and important precautions before use.
Details warnings on electrical shock, cord damage, chemical exposure, and servicing requirements.
Guidance on unpacking the vacuum and performing initial setup steps.
Instructions for securely installing the vacuum cleaner's wall-mount bracket.
Steps and considerations for collecting dry debris with the vacuum.
Steps and considerations for collecting wet materials with the vacuum.
Procedure for safely emptying the collected debris and cleaning the vacuum tank.
Instructions for cleaning, replacing, and properly installing vacuum filters.
Guidance on cleaning the vacuum unit's exterior and proper storage methods.
Identifies common problems like no power or loss of suction with corrective actions.
An illustrated view showing all parts of the vacuum cleaner with their numbers.
Details of the 3-year limited warranty, coverage, and contact information for service.
