Porter-Cable PCXB340SS - Page 8

8
This tool is intended for use on a circuit that
has a receptacle like the one illustrated in
Fig. 1. Fig. 1 shows a three-pronged electrical
plug and receptacle that has a grounding
conductor. If a properly grounded receptacle
is not available, an adapter (Fig. 2) can be
used to temporarily connect this plug to
a two-contact grounded receptacle. The
adapter (Fig. 2) has a rigid lug extending from
it that MUST be connected to a permanent
earth ground, such as a properly grounded
receptacle box.
In all cases, make certain the receptacle is
properly grounded. If you are not sure, have a
qualied electrician check the receptacle.
CAUTION
!
Fig. 1
Fig. 2
Fiche à 3 broches
Broche de mise à la terre
Prise de courant à trois
trous mise à la terre
Cosse de
mise à la terre
S’assurer que
cette connexion
est branchée
sur une terre
connue
Prise à 2 trous
Adaptateur