Posey Bed 8060 33
Purpose
Procedure
Machine Washing the Posey Bed 8060
1. Wash the Canopy on one gentle cycle in cold
water.
NOTE: Water should be between 65-85°F
(18-30°C) for approximately 25 minutes.
2. Dry fabric.
3. Clean the Hook and Loop strips.
4. Clean the bed frame.
NOTE: This may be done with a solution of
diluted disinfectant or water-based germicide.
a. Use a mild detergent.
b. Load panels loosely into washing
machine.
c. Rinse thoroughly with water.
Hang dry at room temperature or
machine dry on air-only cycle (no heat).
Use a stiff brush to remove any lint or
foreign materials.
Wipe frame undercarriage with a damp
cloth.
NOTE: Ensure cloth is damp, not wet.
ALWAYS wash the canopy between patients to help prevent transmission of infectious disease.
To keep the Posey Bed 8060 clean and disinfected.
- DO NOT use industrial extractor-type laundry equipment, as this may damage the zippers
and buckles.
- NEVER use bleach, harsh cleaners or solvents.
- ALWAYS attach hook and loop pieces together. Zip all zippers and connect Quick-Release
Buckles.
- AVOID motor or bed controls when using water to clean bed frame, as this may damage the
electrical components.
- UNPLUG the power cord before cleaning bed frame.
STEPS DO THIS
To Next Page
Loading...
