Potter PFC-4410RC User Manual

Manual #5403550 - Rev R
1/14
St. Louis, MO
(866) 956-0988
www.pottersignal.com
PFC-4410RC
Releasing Panel for
Water and Agent
Extinguishing
Systems
Installation, Operation, and
Instruction Manual
(All specications subject to revision.)

Potter PFC-4410RC Specifications

General

Operating Temperature	32°F to 120°F (0°C to 49°C)
Maximum Signaling Line Circuits (SLCs)	1
Voltage	120VAC, 60Hz
Humidity	93% RH Non-Condensing
Dimensions	14.5" H x 12.5" W x 3.5" D (368 mm x 318 mm x 89 mm)
Enclosure	Steel
Mounting	Surface or semi-flush
Certifications	UL, FM, CSFM
NAC Outputs	4

Summary

Installation Precautions and Safety

General Safety Warnings

Provides critical safety alerts regarding system design, installation, and operation hazards.

Environmental and Installation Cautions

Outlines environmental requirements and installation cautions for the control panel.

System Features and Specifications

System Faults and Statuses

Release Abort Circuit Functionality

Describes the abort circuit modes and operational limitations.

Programming the Panel

Programming Mode Instructions

Guides users through entering and navigating the programming mode.

Password Management

Details procedures for setting and changing the panel access password.

System Testing Procedures

Test Procedure

One Man Walktest Mode

Standard Program Configurations

Custom Program Configuration

Advanced Configuration Options

Zoning and Release Time Settings

Custom Message and Password Changes

Allows setting custom banner messages and changing the panel password.

Chemical System Programming Details

Pre-discharge Timer Settings

Details configuration for pre-discharge timers in chemical systems.

Abort Function Modes

Installation and Setup Guide

General Installation Instructions

Mounting and Wiring Procedures

Battery Requirements and Calculations

Details battery size requirements and calculation methods.

Regulatory Compliance

NEC Section 760-54 Installation Rules