Potter PFC-4064 User Manual

PFC-4064
Conventional Fire Alarm Panel
Keypad Programming Guide
Manual #8870080–Rev A
12/17
Potter Electric Signal Company, LLC
St. Louis, MO
Customer Service: (866) 240-1870 • Technical Support: (866) 956-1211 • Fax: (314) 595-6999
www.pottersignal.com

Potter PFC-4064 Specifications

General

Zones	64
Output Voltage	24 VDC
Operating Temperature	32°F to 120°F (0°C to 49°C)
Enclosure Type	NEMA 1
NAC Outputs	4
Event History Log	1, 000 events
Input Voltage	120 VAC, 60 Hz
Certifications	UL, FM

Summary

Section 2: Pre-Programming Procedures and Defaults

System Defaults: Input Circuit

System Defaults: Output Circuit

System Defaults: Relay Circuit

Section 4: Programming Options

Section 5: Manual Programming Overview

System Setup: Software Zone Attributes

Guides on configuring software zones, defining their styles, and attributes for the PFC-4064 system.

System Setup: Points

Explains how to configure input circuits and NAC circuits (Points) for the fire alarm system.

System Setup: Assign Zones

Details the process of assigning input and output points to appropriate software zones for correlation.

System Setup: Program Relays

Describes how to configure the PFC-4064 relays to activate on specific panel conditions like Alarm or Trouble.

LEARN Programming

Explains the LEARN function for detecting, naming, and selecting device types for connected accessories.

Section 6: DACT Programming

The Programming Cycle

Details the recommended approach for programming the UD-1000 DACT via the panel's keypad.