What to do if my Potter PFC-6200 Control Panel shows a NAC “##”: Shorted error?
To resolve the 'NAC “##”: Shorted' error on your Potter Control Panel, you should locate the short circuit and repair it.
How to fix SLC LOOP SHORTED error on Potter PFC-6200?
If your Potter Control Panel displays 'SLC LOOP SHORTED', you will need to locate the short circuit on the SLC loop and repair it.
What to do if Potter Control Panel displays SLC “##”: DUP ADDR?
If your Potter Control Panel is showing 'SLC “##”: DUP ADDR', you should manually reassign the address of one of the devices connected to the SLC loop.
Why is my Potter PFC-6200 Control Panel showing SLC “##”: OPEN/PWR, and how can I fix it?
If your Potter Control Panel displays 'SLC “##”: OPEN/PWR', first check for 24 VDC to the device. Also, check, connect, or replace the batteries as needed.
How to troubleshoot SLC 1: Missing error on Potter Control Panel?
If your Potter Control Panel displays 'SLC 1: Missing', you should check if the device is currently operating or connect the device to the SLC loop.
How to fix Keypad “##”: Missing error on Potter PFC-6200 Control Panel?
If your Potter Control Panel displays 'Keypad “##”: Missing', check the wiring and programming.
General| Brand | Potter |
|---|---|
| Model | PFC-6200 |
| Category | Control Panel |
| Language | English |
Explains how to install and program the PFC-6200 Fire Alarm Control Panel.
Describes the PFC-6200 system as a fire control panel for life safety applications.
Lists the key features of the PFC-6200 system, including SLC, NACs, and I/O circuits.
Defines key terms and acronyms used throughout the manual.
Outlines cabinet, visual indicators, and LCD display specifications for the PFC-6200.
Details required mounting and operating environmental conditions for the panel.
Provides electrical ratings and limits for the PFC-6200 panel.
Presents detailed physical dimensions of the PFC-6200 cabinet.
Explains how to determine battery size for standby and alarm times.
Explains how to calculate device load considering isolators in SLC configurations.
Covers the installation procedures for the SLC, including wiring requirements.
Instructions on assigning unique addresses to SLC devices.
Covers installation of NACs, including wiring and configurations.
Instructions for installing the CA-6075 Class A expander card.
Information on connecting P-Link devices like annunciators and expanders.
Overview of the control panel's basic functions and components.
Explains the function of the panel's navigation keys.
Describes the meaning of the panel's status indicator LEDs.
Provides a visual representation of the panel's menu structure.
Lists and describes various programming features and their UL864 settings.
Detailed steps for using the LEARN mode to configure devices.
Instructions for uploading and downloading configuration and event data.
Configuration and use of email notifications for system events.
Overview of system programming, device mapping, and zone configuration.
Details specifications for the PSN-1000/PSN-1000(E) power supply boards.
Guidance on calculating battery requirements for the power supply.
Details NAC circuits on the PSN-1000/PSN-1000(E), including wiring.
Details programming for IP communication to remote monitoring.
Provides step-by-step instructions for common panel operations.
Guide for configuring modem connectivity for panel communication.
Requirements for initial system inspection and testing.
Guidelines for regular system maintenance and testing.
Information on maintaining the system's rechargeable batteries.
Lists common error messages and recommended troubleshooting actions.
Describes the panel's state when in normal standby mode.
Describes the panel's behavior during an alarm condition.
Describes the panel's behavior during a trouble condition.
Guidelines for system testing and maintenance procedures.
To Next Page
