Pottery Barn Ava - Assemble Second X-Base; Secure Top Panel

090912
3/5
A
E
B
B
L
O
3. Repeat Step 1 and Step 2 to assemble the X-Base (B), as shown in the illustration below.
C
B
I
L
4. Turn the assembled table frame upright. Attach the Top Panel (E) to the table frame by inserting the pre-drilled
holes on the underside of the Top Panel into the wood dowels on the X- Base.
Insert the Short Allen Bolt (O) through the Large Lock Washer (L), Large Flat Washer (K), and through the pre-
drilled holes on the Top Frame (A) and X- Base (B). Then use the Allen Key (N) to tighten the 6 bolts (O) into
the nuts embedded on the underside of the Top Panel (E).