Pottery Barn Canopy Bed Frame - Mounting the Canopy to the Wall; Wall Mounting Preparations


Date:8‐Jun‐15www.potterybarn.com  Page10of12
Rev: 



Mount The Canopy To The Wall:
NOTE: For safe mounting it is essential to use the proper hardware for your wall type. The hardware included is
meant for drywall or wood stud mounting only. If walls are concrete, brick or plaster, please consult your local
hardware store for assistance in selecting the appropriate hardware. Mount to wood studs whenever possible.
1. Move the Canopy Frame to the desired place beside the wall. And make sure the mounting bracket against the
wall.
2. Use a sharp pencil or a screw to mark the wall through the hole located in the Bracket. This mark is the
insertion mark for the provided hardware (Mount to wood studs whenever possible).
3. The provided Toggle (j) is needed for drywall applications, but cannot penetrate into wall studs (wood).
Therefore, we recommend that you use a stud finder to determine if any of the insertion marks align with a wall
stud. If so, only a Mounting Screw (i) will be used at that mark. If not, then both a Toggle (j) and a Toggle
Screw (k) will be used.