Pottery Barn Canopy Bed Frame - Drywall Mounting Instructions; Stud Mounting Instructions


Date:8‐Jun‐15www.potterybarn.com  Page11of12
Rev: 



4. For drywall mounting: using a screwdriver to engage a Toggle (j) and position the toggle tip against the wall
at the insertion mark. Gently push the toggle into the wall as you rotate the toggle clockwise. Continue
rotating until the large flange of the toggle is flush with the wall.
5. Once the Toggle (j) is installed into the wall at the marked locations, use a screwdriver to secure the Bracket
(I) through toggle Screw (k) into the toggle.
6. For stud mounting: using a screwdriver to secure the Bracket (I) through Mounting screw (i), simply drive
down Mounting Screw (i) for securing.
NOTE: Tighten bolt
on bracket with
2mm Allen Wrench
(h).
h
i
I
g
WALL
I
h
k
j