Poulan Pro 2155 User Manual (English)

Questions and Answers:

M
melissaandersonJul 26, 2025
Why won't my Poulan Pro 2155 start?
- M
  Michael EllisonJul 26, 2025
  If your Poulan Pro Chainsaw won't start, several factors could be the cause: * The ignition switch might be off; move it to the ON position. * The engine could be flooded; refer to the “Difficult Starting” section in the Operation Section. * The fuel tank may be empty; refill it with the correct fuel mixture. * The spark plug might not be firing; install a new spark plug. * Fuel may not be reaching the carburetor; check for a dirty fuel filter and replace if necessary, or check for kinked or split fuel lines and repair or replace them.
G
Garrett CraigJul 31, 2025
Why Poulan Pro 2155 engine will not idle properly?
- H
  Harold BrownJul 31, 2025
  If your Poulan Pro Chainsaw engine won't idle properly, it could be due to the following reasons: * The idle speed may need adjustment; see “Carburetor Adjustment” in the Service and Adjustments Section. * The carburetor may require adjustment; contact an authorized service dealer for assistance.
J
Joel WintersAug 7, 2025
What to do if Poulan Pro Chainsaw chain moves at idle speed?
- L
  lori33Aug 7, 2025
  If the chain on your Poulan Pro Chainsaw moves at idle speed, it could be due to: * Idle speed requiring adjustment; see “Carburetor Adjustment” in the Service and Adjustments Section. * The clutch requiring repair; contact an authorized service dealer.
R
Robert RojasAug 13, 2025
What to do if Poulan Pro 2155 won't accelerate?
- F
  ffletcherAug 14, 2025
  If your Poulan Pro Chainsaw won't accelerate, lacks power, or dies under a load, consider these potential causes: * The air filter may be dirty; clean or replace it. * The spark plug might be fouled; clean, replace, and regap the plug. * The chain brake could be engaged; disengage it. * The carburetor may require adjustment; in this case, it is recommended to contact an authorized service dealer.
D
davisedwardAug 19, 2025
How to fix excessive smoke from Poulan Pro Chainsaw?
- K
  Keith NortonAug 19, 2025
  Excessive smoke from your Poulan Pro Chainsaw usually indicates too much oil mixed with the gasoline. To resolve this, empty the fuel tank and refill it with the correct fuel mixture.

Poulan Pro 2155 Specifications

General

Brand	Poulan Pro
Model	2155
Category	Chainsaw
Language	English

Summary

IDENTIFICATION OF SYMBOLS

SAFETY RULES

PLAN AHEAD

Prepare for safe operation by reading the manual and understanding all safety rules before use.

OPERATE YOUR SAW SAFELY

HANDLE FUEL WITH CAUTION

Follow specific guidelines for safe handling and storage of fuel to prevent fire and explosion hazards.

KICKBACK

Understand the causes and prevention of kickback for safe chainsaw operation.

KICKBACK

REDUCE THE CHANCE OF KICKBACK

Learn techniques to minimize the risk of kickback during chainsaw use.

MAINTAIN CONTROL

Proper grip, stance, and body positioning are key to maintaining control of the saw.

KICKBACK SAFETY FEATURES

Understand the safety features designed to reduce kickback hazards.

KICKBACK

CHAIN BRAKE AND CKA ANGLE

Details on the chain brake mechanism and computed kickback angles.

ASSEMBLY

ATTACHING THE BAR & CHAIN

Step-by-step instructions for installing the guide bar and chain onto the chainsaw.

ASSEMBLY

CHAIN TENSION

Properly adjusting and checking chain tension is crucial for safe and effective operation.

OPERATION

KNOW YOUR CHAIN SAW

Familiarize yourself with the names and locations of all chainsaw components and controls.

CHAIN SAW CONTROLS

Understand the function of key controls like ON/STOP switch, throttle, choke, and primer bulb.

CHAIN BRAKE

Understand the function and operation of the chain brake for safety.

CHAIN TENSION

Regularly check and adjust chain tension for optimal performance and safety.

FUELING & LUBRICATION

FUELING ENGINE

Learn the correct fuel mixture and safe fueling procedures.

BAR AND CHAIN LUBRICATION

Understand the importance of bar and chain lubrication and how to maintain it.

STARTING THE ENGINE

Follow step-by-step instructions for starting the chainsaw engine, including cold and warm starts.

CHAIN BRAKE OPERATION

BRAKING FUNCTION CONTROL

Learn how to manually test the chain brake's responsiveness.

INERTIA ACTIVATING FUNCTION CONTROL

Understand how the chain brake activates automatically during kickback.

CUTTING METHODS

IMPORTANT POINTS

Key safety and operational considerations before and during cutting.

CUTTING METHODS

FELLING LARGE TREES

Techniques for safely felling large trees, including notch cutting.

NOTCH CUT AND FELLING THE TREE

Detailed steps for making the notch and felling cut for large trees.

CUTTING A FALLEN TREE (BUCKING)

TYPES OF CUTTING USED FOR BUCKING

Learn different techniques for cutting logs into desired sizes.

BUCKING WITHOUT A SUPPORT

Methods for cutting logs that are not supported, avoiding pinching.

BUCKING USING A LOG OR SUPPORT STAND

Techniques for cutting logs properly when they are supported.

LIMBING

PRUNING

Safe methods for cutting branches from a felled tree, including height limitations.

LIMBING AND PRUNING

General safety precautions and important points for removing branches.

MAINTENANCE SCHEDULE

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

Regular inspection and maintenance of the muffler and spark arresting screen.

CLEANING THE SPARK ARRESTING SCREEN

Procedure for cleaning the spark arresting screen to maintain performance and safety.

CARBURETOR ADJUSTMENT

IDLE SPEED-T

Procedure for adjusting the idle speed screw to ensure proper engine operation.

BAR MAINTENANCE

How to service the guide bar to ensure proper cutting and prevent damage.

CHAIN SHARPENING

Information regarding chain sharpening and recommendation for professional service.

SPARK PLUG

Guidance on replacing the spark plug for optimal engine performance.

STORAGE

TROUBLESHOOTING TABLE

A guide to diagnosing and resolving common engine and operational problems.

NEED ASSISTANCE?

Information on how to get help for issues not covered in the manual.

LIMITED WARRANTY

U.S. EPA/CALIFORNIA/ENVIRONMENT CANADA EMISSION CONTROL WARRANTY STATEMENT

Details on emissions control system warranty, owner responsibilities, and claims.

Related product manuals

Poulan Pro 2150

18 pages

1950, 1975, 2055, 2050, 2075, 2150, 2155, 2175, 2350, 2375, 2150PR

Poulan Pro 2155 User Manual

Table of Contents

Questions and Answers:

Poulan Pro 2155 Specifications

Summary

IDENTIFICATION OF SYMBOLS

SAFETY RULES

PLAN AHEAD

OPERATE YOUR SAW SAFELY

HANDLE FUEL WITH CAUTION

KICKBACK

KICKBACK

REDUCE THE CHANCE OF KICKBACK

MAINTAIN CONTROL

KICKBACK SAFETY FEATURES

KICKBACK

CHAIN BRAKE AND CKA ANGLE

ASSEMBLY

ATTACHING THE BAR & CHAIN

ASSEMBLY

CHAIN TENSION

OPERATION

KNOW YOUR CHAIN SAW

CHAIN SAW CONTROLS

CHAIN BRAKE

CHAIN TENSION

FUELING & LUBRICATION

FUELING ENGINE

BAR AND CHAIN LUBRICATION

STARTING THE ENGINE

CHAIN BRAKE OPERATION

BRAKING FUNCTION CONTROL

INERTIA ACTIVATING FUNCTION CONTROL

CUTTING METHODS

IMPORTANT POINTS

CUTTING METHODS

FELLING LARGE TREES

NOTCH CUT AND FELLING THE TREE

CUTTING A FALLEN TREE (BUCKING)

TYPES OF CUTTING USED FOR BUCKING

BUCKING WITHOUT A SUPPORT

BUCKING USING A LOG OR SUPPORT STAND

LIMBING

PRUNING

LIMBING AND PRUNING

MAINTENANCE SCHEDULE

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

CLEANING THE SPARK ARRESTING SCREEN

CARBURETOR ADJUSTMENT

IDLE SPEED-T

BAR MAINTENANCE

CHAIN SHARPENING

SPARK PLUG

STORAGE

TROUBLESHOOTING TABLE

NEED ASSISTANCE?

LIMITED WARRANTY

U.S. EPA/CALIFORNIA/ENVIRONMENT CANADA EMISSION CONTROL WARRANTY STATEMENT

Related product manuals