Poulan Pro 2250 User Manual

Poulan
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner I'outU au d_taillant.
• 1-800-554-6723
www.poulan.com
Instruction Manual
Manual de Instrucciones
Manuel d'lnstructions
2250 / 2450 / 2550 / 2550 SE / 2555
&
For Occasional Use Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea et manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tousles avertisse-
ments et toutes les instructions de s_curit_. Tout d_faut de le faire
pourrait entrafner des blessures graves.
Electrolux Home Products, Inc.
250 Bobby Jones Expressway
Augusta, GA 30907
Electrolux Canada Corporation
6150 McLaughlin Road
Mississauga, ON L5R 4C2
[] The Electrolux Group. The world's NO. 1 choice.
Copyright (02003 Electrolux Home Products, Inc. 530163693 6/25/03

Poulan Pro 2250 Specifications

General

Engine Displacement	50 cc
Power Output	2.5 kW
Weight	13 lbs
Chain Pitch	0.325 inches
Chain Gauge	0.050 inches
Type	Gas-powered

Summary

Identification of Symbols and Safety Rules

General Safety Precautions

Covers essential safety rules including planning, user restrictions, protective gear, and maintaining a safe work area.

Safe Operation Practices and Maintenance

Operating Your Saw Safely

Details how to safely operate the chainsaw, including one-hand use, ventilation, ladder use, proper starting, and stopping.

Saw Maintenance and Fuel Caution

Kickback Prevention and Control

Reducing Kickback Chance

Provides methods to reduce the risk of kickback, such as avoiding obstructions, sharp chains, and proper cutting techniques.

Proper Grip and Stance

Guides users on maintaining a firm grip, proper body balance, stance, and avoiding overreaching for better control.

Kickback Safety Features

Feature Descriptions and CKA Table

Explains safety features like reduced-kickback bars/chains and presents the Computed Kickback Angle (CKA) table.

Assembly Instructions

Attaching Bar and Chain

Chain Tensioning

Checking and Adjusting Chain Tension

Saw Components and Controls

Fueling and Starting Procedures

Fueling and Lubrication Guide

Cold Engine Starting Steps

Provides detailed instructions for starting a cold engine, including choke and primer bulb usage.

Operation and Cutting Methods

Chain Brake and Cutting Techniques

Specific Maintenance Procedures

Carburetor and Bar Maintenance

Chain Sharpening and Storage

Troubleshooting and Warranty Information

Troubleshooting Common Issues

Offers solutions for common chainsaw problems, including starting issues, power loss, and chain movement.