EasyManua.ls Logo

Poulan Pro 2375 - User Manual

Poulan Pro 2375
18 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1950 / 1975 / 2055 / 2050 / 2075 / 2150
2155 / 2175 / 2350 / 2375 / 2150PR
LE Series
Electrolux Home Products, Inc.
104 Warren Road
Augusta, GA 30907
ENGLISH
ESPAÑOL
FRANÇAIS
530164364 6/16/04
R
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l’outil au détaillant.
1--800--554--6723
www.poulan.com
For Occasional Use Only
Copyright E2004 Electrolux Home Products, Inc.
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instru ctions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.

Table of Contents

Questions and Answers

  • B
    Brooke MartinJul 26, 2025
    Why won't my Poulan Pro Chainsaw start?
    • R
      Raymond WalkerJul 26, 2025
      If your Poulan Pro Chainsaw won't start, several factors could be the cause: * The ignition switch might be off; move it to the ON position. * The engine could be flooded; refer to the “Difficult Starting” section in the Operation Section. * The fuel tank may be empty; refill it with the correct fuel mixture. * The spark plug might not be firing; install a new spark plug. * Fuel may not be reaching the carburetor; check for a dirty fuel filter and replace if necessary, or check for kinked or split fuel lines and repair or replace them.
  • G
    George MendozaAug 1, 2025
    Why Poulan Pro 2375 Chainsaw engine will not idle properly?
    • J
      Joshua ParksAug 1, 2025
      If your Poulan Pro Chainsaw engine won't idle properly, it could be due to the following reasons: * The idle speed may need adjustment; see “Carburetor Adjustment” in the Service and Adjustments Section. * The carburetor may require adjustment; contact an authorized service dealer for assistance.
  • Z
    zparkAug 7, 2025
    What to do if Poulan Pro Chainsaw chain moves at idle speed?
    • S
      Scott AshleyAug 7, 2025
      If the chain on your Poulan Pro Chainsaw moves at idle speed, it could be due to: * Idle speed requiring adjustment; see “Carburetor Adjustment” in the Service and Adjustments Section. * The clutch requiring repair; contact an authorized service dealer.
  • R
    Rachel ColeAug 13, 2025
    What to do if Poulan Pro 2375 Chainsaw won't accelerate?
    • C
      Chelsea StephensAug 13, 2025
      If your Poulan Pro Chainsaw won't accelerate, lacks power, or dies under a load, consider these potential causes: * The air filter may be dirty; clean or replace it. * The spark plug might be fouled; clean, replace, and regap the plug. * The chain brake could be engaged; disengage it. * The carburetor may require adjustment; in this case, it is recommended to contact an authorized service dealer.
  • K
    Kimberly Rivera MDAug 19, 2025
    How to fix excessive smoke from Poulan Pro 2375 Chainsaw?
    • E
      Ernest FletcherAug 19, 2025
      Excessive smoke from your Poulan Pro Chainsaw usually indicates too much oil mixed with the gasoline. To resolve this, empty the fuel tank and refill it with the correct fuel mixture.

Summary

Instruction Manual Overview

General Safety Warnings

Crucial safety advice and warnings in multiple languages for initial use.

Safety Guidelines and Symbols

Essential Safety Rules

Core safety rules and precautions for chain saw operation.

Safe Operation and Maintenance

Safe Saw Operation Practices

Guidelines for safe handling, two-handed use, and operating environment.

Understanding Kickback

Explanation of kickback, its causes, and potential consequences.

Kickback Prevention and Control

Reducing Kickback Risk

Methods to minimize the chance of kickback occurring during use.

Maintaining Operator Control

Techniques for proper grip, stance, and body positioning for control.

Chain Saw Components and Safety Features

Low-Kickback Design Elements

Details on low-kickback chains, guide bars, and hand guards.

Chain Brake and CKA

Information on chain brake function and computed kickback angles.

Assembly and Setup

Attaching Bar and Chain

Chain Tension Management

Checking Chain Tension

Adjusting Chain Tension

Operating Your Chain Saw

Operation of Chain Brake

Fueling and Lubrication

Engine Fueling Procedure

Bar and Chain Lubrication

Starting a Cold Engine

Detailed steps for starting the engine from a cold state.

Starting and Cutting Procedures

Engine Starting Methods

Procedures for starting warm or difficult/flooded engines.

Chain Brake Operation Check

Cutting Method Fundamentals

Tree Felling Techniques

Felling Preparation and Safety

Felling Large Trees with Notches

Cutting Fallen Trees (Bucking)

Bucking Safety and Techniques

Maintenance and Inspection

Service and Adjustments

Carburetor and Bar Service

Storage and Troubleshooting

Proper Storage Procedures

Troubleshooting Common Problems

Table of common issues, causes, and remedies for the chain saw.

Poulan Pro 2375 Specifications

General IconGeneral
BrandPoulan Pro
Model2375
CategoryChainsaw
LanguageEnglish

Related product manuals