Poulan Pro 2350 User Manual

Poulan
t_ Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pa8 retourner I'outil au detaillant.
• 1-800-554-6723
www.poulan.com
Instruction Manual
Manual de Instrucciones
Manuel d'lnstructions
1950 / 1975 / 2050 / 2055 / 2075 / 2150
2155 / 2175 / 2350 / 2375 / 2150PR
For Occasional Use Only ¢(UL)us
v
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tousles avertisse-
merits et toutes les instructions de securite. Tout defaut de le faire
pourrait entra_ner des blessures graves.
Eiectrolux Home Products, Inc. Eiectrolux Canada Corporation
250 Bobby Jones Expressway 6150 McLaughlin Road
Augusta, GA 30907 Mississauga, Ontario L5R 4C2
[_J The Electrolux Group. The world's No. 1 choice.
K_TCHEN, CL_ANIN_ AND OUTDOOR APPL_NCE_ CC_14BINED
Copyright @2003 Electrolux Home Products, Inc
530163649 7/21/03

Poulan Pro 2350 Specifications

General

Engine Type	2-Cycle
Engine Displacement	38 cc
Bar Length	16 in
Oil Capacity	6.8 oz
Chain Pitch	3/8 in
Chain Gauge	0.050 inches

Summary

Safe Operation and Maintenance

Operating Your Saw Safely

Procedures for safe handling and operation of the chainsaw.

Fuel Handling and Kickback Awareness

Safe practices for fuel management and understanding kickback hazards.

Kickback Prevention and Control

Reducing the Chance of Kickback

Strategies and techniques to minimize kickback incidents.

Maintaining Control While Cutting

Proper body positioning and grip for safe saw control.

Advanced Safety Features and Specifications

Kickback Reduction Components Explained

Details on guide bars, chains, and hand guards for safety.

Assembly and Bar/Chain Installation

Attaching the Guide Bar and Chain

Step-by-step guide for installing the bar and chain.

Chain Tension Management

Checking Chain Tension

Method for verifying the correct chain tension.

Adjusting Chain Tension

Procedure to adjust chain tension using the adjustment screw.

Chain Saw Operation Basics

Key Controls and Components

Identifies main parts, controls, and switches like ON/STOP, throttle, choke.

Starting the Engine

Basic steps for starting the chainsaw, including primer and choke usage.

Fueling, Lubrication, and Starting

Engine Fueling and Mixing

Instructions for correctly fueling the engine with oil and gasoline.

Bar and Chain Lubrication Importance

Starting Engine Procedures

Starting Procedures and Cutting Methods

Starting Cold and Warm Engines

Advanced Cutting: Felling Trees

Notch Cutting for Felling

Cutting Fallen Trees (Bucking)

Bucking Safety and Best Practices

Detailed Maintenance Procedures

Air Filter, Muffler, and Spark Arrestor Care

Carburetor Adjustment and Bar Maintenance

Troubleshooting and Support Resources

Troubleshooting Common Issues