Poulan Pro 2375 LE User Manual

Poulan
t_ Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner routil au detaillant.
• 1-800-554-6723
www.poulan.com
Instruction Manual
Manual de Instrucciones
Manuel d'lnstructions
A
1950 / 1975 / 2055 / 2050 / 2075 / 2150
2155/2175/2350/2375/2150PRLE Series /
For Occasional Use Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tousles avertisse-
merits et routes les instructions de securite. Tout defaut de le faire
pourrait entra_ner des blessures graves.
Poulan
1030 Stevens Creek Road
Augusta, GA 30907
545123622 8/25/06

Poulan Pro 2375 LE Specifications

General

Engine Displacement	2.3 cu. in.
Bar Length	18 in.
Weight	12.3 lbs
Chain Pitch	0.325 in.
Chain Gauge	0.050 inches

Summary

Poulan Chainsaw Instruction Manual

Safe Chainsaw Operation Guidelines

Understanding Chainsaw Kickback Hazards

Reducing Chainsaw Kickback Risk

Maintaining Chainsaw Control

Chainsaw Kickback Safety Features

Chain Brake and Kickback Angle (CKA)

Chainsaw Assembly Guide

Attaching the Guide Bar and Chain

Step-by-step instructions for fitting the guide bar and chain.

Chainsaw Operation Overview

Know Your Chainsaw Components

Identify and understand the various parts of your chainsaw.

Fueling and Lubrication Procedures

Engine Fueling Instructions

Safe procedures for mixing and adding fuel to the engine.

Bar and Chain Lubrication Importance

Chainsaw Starting Procedures

Starting a Cold Engine

Steps for starting the engine when cold or out of fuel.

Chainsaw Cutting Methods Overview

Cutting Techniques for Bucking

Tree Felling Techniques

Felling Large Trees Guide

Method for felling trees larger than 6 inches in diameter.

Notch Cutting for Tree Felling

Detailed steps for creating the notch and felling the tree.

Cutting Fallen Trees (Bucking)

Bucking Without Support Techniques

Bucking with Log or Support Stand

Chainsaw Service and Adjustments

Carburetor Adjustment Procedures

Procedures for adjusting the carburetor for optimal performance.

Idle Speed Adjustment

Guide Bar Maintenance and Service

Chainsaw Troubleshooting Guide