Poulan Pro 262 User Manual

262
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
Electrolux Home Products, Inc.
1030 Stevens Creek Road
Augusta, GA 30907
ENGLISH
ESPAÑOL
FRANÇAIS
530165228 9/7/04
R
Electrolux Canada Corporation
6150 McLaughlin Road
Mississauga, ON L5R 4C2
Copyright E2004 Electrolux Home Products, Inc.
For Occasional Use Only
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions

Poulan Pro 262 Specifications

General

Brand	Poulan Pro
Model	262
Category	Chainsaw
Language	English

Summary

Identification of Symbols

Safety Symbol Explanations

Explains symbols for danger, manual, protection, two-handed use, and kickback.

Safety Rules

Planning Ahead for Safe Operation

Read manual, use adult users, wear protective gear, keep area clear, stay alert.

Safe Operation and Handling

Operating Your Saw Safely

Use two hands, operate in ventilated area, avoid ladders, stop engine before setting down.

Maintaining Saw Condition

Service by dealer, ensure chain stops, keep handles clean, tighten fasteners, use recommended parts.

Fuel Handling and Safety

Avoid smoking, eliminate sparks, mix/pour outdoors, store fuel safely.

Kickback Prevention and Control

Reducing Kickback Chances

Recognize kickback, avoid obstructions, sharp/tensioned chain, full speed, careful re-entry.

Maintaining Saw Control

Firm grip, straight arms, balanced stance, avoid overreaching, cut below shoulder height.

Saw Features for Kickback Reduction

Features like reduced-kickback guide bars and low-kickback chains.

Chain Brake and Kickback Angles

Chain Brake Functionality

Designed to stop chain during kickback, activated manually or by inertia.

Kickback Angle (CKA) Explained

CKA represents kickback angle/energy; lower values are safer.

Assembly Procedures

Attaching Bar and Chain

Step-by-step guide to attach the guide bar and chain securely.

Safety Notices and Standards

Vibration hazards, spark arresting screen, and compliance standards.

Chain Tension Management

Adjusting Chain Tension

How to adjust chain tension correctly to prevent damage or injury.

Checking Chain Tension

Method to check if chain is too tight or too loose.

Operation Overview

Chain Saw Component Identification

Identifies key parts like ON/STOP switch, throttle, chain brake, and primer bulb.

Basic Controls and Functions

Explains ON/STOP switch, throttle trigger, lock-out, choke/fast idle lever, primer bulb.

Fueling and Lubrication

Fueling the Engine Safely

Proper fuel mixture, safety tips for handling and storing fuel.

Bar and Chain Lubrication

Importance of continuous lubrication, checking oil level, and using correct oil.

Starting Procedures

Cold Engine Starting

Step-by-step procedure for starting a cold engine.

Starting and Cutting Procedures

Warm Engine Starting

Steps for starting a warm engine.

Starting a Flooded Engine

How to clear a flooded engine and start it.

Chain Brake Operation and Testing

How the chain brake works and how to test its function.

General Cutting Best Practices

Check tension, cut wood only, stop if foreign object struck.

Cutting Techniques

Bucking Techniques

Methods for bucking logs with or without support.

Limbing and Pruning Safety

Safety precautions for limbing and pruning, avoiding kickback.

Limbing and Pruning Procedures

Limbing a Tree

Steps for safely limbing a felled tree, working from base to top.

Pruning Techniques

Safe pruning limits and cutting method for branches.

Service and Maintenance

General Service Recommendations

Disconnect spark plug before maintenance, use authorized dealers for complex repairs.

Maintenance Schedule

Routine Checks and Cleaning

Schedule of checks and cleaning tasks for different operating hours.

Inspecting Muffler and Spark Arresting Screen

Muffler and Spark Arresting Screen Inspection

Importance of inspecting these parts for safety and performance.

Cleaning the Spark Arresting Screen

Step-by-step guide to clean the spark arresting screen.

Carburetor and Bar Maintenance

Carburetor Adjustment Procedures

Procedures for adjusting idle speed and troubleshooting carburetor issues.

Bar Maintenance Procedures

Cleaning oil holes, guide bar rails, and when to replace the bar.

Chain Sharpening and Spark Plug

Recommendations for chain sharpening and spark plug replacement.

Storage and Troubleshooting

Proper Storage Procedures

Steps for storing the saw and fuel safely, including draining fuel.

Troubleshooting Common Issues

Table listing common problems, causes, and remedies for the engine.

Limited Warranty

Warranty Coverage and Exclusions

Details warranty periods, coverage, exclusions, and limitations.

Manufacturer and Owner Responsibilities

Manufacturer's and owner's duties regarding warranty and maintenance.

Emission Control Warranty Details

Warranty Period and Covered Parts

Specifics on coverage length and parts covered under emission warranty.

Filing Claims and Service Locations

How to file a claim and where to get warranty service.

Maintenance and Emissions Compliance

Owner's role in maintenance and engine certification for emissions.