Poulan Pro 2750 User Manual

WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. F ailure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
ENGLISH
ESP AÑOL
FRANÇAIS
530088183 4/10/02
Electrolux Home Products, Inc.
250 Bobby Jones Expressway
Augusta, GA 30907
Electrolux Canada Corporation
6150 McLaughlin Road
Mississauga, Ontario L5R 4C2
Copyright E2002 Electrolux Home Products, Inc.
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
R
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l’outil au détaillant.
1--800--554--6723
www.poulan.com
2750 / 2775 / 2900 / 3050

Poulan Pro 2750 Specifications

General

Brand	Poulan Pro
Model	2750
Category	Chainsaw
Language	English

Summary

SAFETY RULES

Safe Saw Operation Guidelines

Guidelines for safe operation, including handling, environment, and specific actions.

Fuel Handling Safety Precautions

KICKBACK HAZARDS AND PREVENTION

Understanding Kickback Types

Explains rotational kickback, pinch kickback, and pull-in hazards.

Strategies to Reduce Kickback

Methods to reduce kickback by maintaining control and proper operation.

ASSEMBLY PROCEDURES

Attaching the Bar and Chain

Step-by-step guide for mounting the guide bar and chain onto the saw.

Adjusting Chain Tension

Instructions for setting and checking the correct chain tension for safe operation.

CHAIN SAW OPERATION

Know Your Saw Controls

FUELING AND LUBRICATION

Fueling the Engine

Bar and Chain Lubrication

STARTING THE CHAIN SAW

Starting a Cold Engine

Procedure for starting a cold or recently refueled engine using the choke.

Starting a Warm or Flooded Engine

Steps for starting a warm engine or an engine that may be flooded.

CUTTING METHODS

Safe Cutting Practices

Felling Large Trees

Detailed steps for felling large trees using the notch method.

BUCKING TECHNIQUES

Bucking Without Support

Bucking with Log Support

SERVICE AND MAINTENANCE

Maintenance Schedule

Bar Maintenance & Spark Plug

TROUBLESHOOTING AND ASSISTANCE

Common Problems and Solutions

A table listing common issues, their causes, and recommended remedies.