Poulan Pro P4018WT User Manual

19 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

P3314 / P3314WS / P3314WSA

P3416 / P3516PR / P4018WM

P4018WT / P3818AV

P4018AV / P4018AV BH

Poulan

1030 Stevens Creek Road

Augusta, GA 30907

ENGLISH

ESPAÑOL

FRANÇAIS

545137224 11/30/06

R

Please do not return unit to retailer.

Por favor, no devuelva el aparato al lugar de compra.

Veuillez ne pas retourner l’outil au détaillant.

1--800--554--6723

www.poulan.com

For Occasional U se Only

Instruction Manual

Manual de Instrucciones

Manuel d’Instructions

WARNING:

Read and follow all Safety Rules and Operating Instructions before

using this product. Failure to do so can result in serious injury.

ADVERTENCIA:

Lea el manua l de instrucciones y siga todas las advertencias e en-

strucciones de seguridad. El no hacerlo puede resultar en lesiones

graves.

AVERTISSEMENT:

Lire le manuel d’instructions et bien respecter tous les avertisse-

ments et toutes les instructions de sécurité. Tout défaut de le faire

pourrait entraîner des blessures graves.

Poulan

5855 Terry Fox Way

Mississauga, Ontario L5V 3E4

Other manuals for Poulan Pro P4018WT

Parts List3 pages

Questions and Answers:

M
michael71Aug 7, 2025
What to do if my Poulan Pro Chainsaw engine will not start?
- E
  Edward RobertsAug 7, 2025
  If your Poulan Pro Chainsaw engine won't start or dies quickly, here's what to check: * Ensure the ignition switch is set to ON. * Refill the fuel tank with the correct fuel mixture. * Install a new spark plug. * Check the fuel filter for dirt and replace if needed. Also, inspect the fuel line for kinks or splits, and repair or replace it as necessary. * If the engine is flooded, refer to the “Difficult Starting” section in the Operation Section.
P
Philip GonzalezAug 13, 2025
How to fix Poulan Pro P4018WT Chainsaw that will not idle properly?
- I
  Isaac JohnsonAug 13, 2025
  If your Poulan Pro Chainsaw engine won't idle properly, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the carburetor may require adjustment by an authorized service dealer.
D
Daniel OlsonAug 19, 2025
What to do if the chain moves at idle speed on my Poulan Pro P4018WT Chainsaw?
- A
  Alexa FernandezAug 19, 2025
  If the chain on your Poulan Pro Chainsaw moves at idle speed, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the clutch may require repair by an authorized service dealer.
C
Charles KeithAug 25, 2025
Why Poulan Pro P4018WT engine will not accelerate?
- J
  James MartinezAug 26, 2025
  If your Poulan Pro Chainsaw engine won't accelerate, lacks power, or dies under a load, consider the following: 1. Clean or replace the air filter. 2. Clean or replace the spark plug and regap it. 3. Ensure the chain brake is disengaged. 4. If these steps don't resolve the issue, the carburetor may require adjustment by an authorized service dealer.
A
Alvin JacksonAug 31, 2025
Why does my Poulan Pro P4018WT smoke so much?
- X
  xlopezAug 31, 2025
  If your Poulan Pro Chainsaw engine smokes excessively, it's likely due to too much oil in the fuel mixture. Empty the fuel tank and refill it with the correct fuel mixture.

Poulan Pro P4018WT Specifications

General

Engine Type	2-Cycle
Engine Displacement	40 cc
Bar Length	18 in
Oil Capacity	6.8 oz
Chain Pitch	3/8 in
Chain Gauge	.050 in

Related product manuals

Poulan Pro P4018WM

Poulan Pro P4018WTL

Poulan Pro P4018

Poulan Pro P4018 AV

Preview: Poulan Pro PP3816

Poulan Pro PP3816

Preview: Poulan Pro PP4218

Poulan Pro PP4218

Preview: Poulan Pro PR5020

Poulan Pro PR5020

Preview: Poulan Pro PR3816

Poulan Pro PR3816

Preview: Poulan Pro PL3816

Poulan Pro PL3816

Poulan Pro PR4218

Preview: Poulan Pro PN3816

Poulan Pro PN3816

Poulan Pro PP400E