2
IDENTIFICATION OF SAFETY SYMBOLS
n
o
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
No Load Speed Rational speed, at no load
/min Per Minute
Revolutions, strokes, surface speed, orbits
etc., per minute.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury user must read and
understand operator’s manual before using
this product.
Eye Protection
Always wear eye protection with side shields
marked to comply with ANSI Z87.1 when
operating this equipment.
Safety Alert Precautions that involve your safety.
Ricochet
Pay attention that bystanders are not injured
through foreign objects thrown from the mower.
Keep Bystanders Away Keep Bystanders Away
Keep Hands and Feet Away
Keep hands and feet away from blade and
cutting area.
No Reach Do not reach hands or feet under mower deck.
No Slope
Do not operate on inclines greater than 15º.
Mow across the face of slopes, never up and
down.
Beware of electric shock
hazard
Beware of electric shock hazard.
Wait for all components of machine to have
completely stopped before touching them.
To Next Page
Loading...
