Need help?Do you have a question about the Power Acoustik PEQ-007 and is the answer not in the manual?
General| Brand | Power Acoustik |
|---|---|
| Model | PEQ-007 |
| Category | Amplifier |
| Language | English |
Details the two-body design and available connecting cable lengths for installation flexibility.
Covers 7-band graphic EQ, presets, spectrum analyzer, and user memory settings.
Explains volume, fader, input source selection, remote power, and reset functions.
Details subwoofer crossover, level adjustment, display, and on/off selection.
Controls main volume up/down and front-to-rear fader balance.
Adjusts spectrum display sensitivity and controls subwoofer pre-out on/off.
Adjusts individual frequency bands (60Hz to 15KHz) for audio tuning.
Selects display patterns: NORMAL, PEAK HOLD, MOUTH, and CIRCLE.
Saves custom EQ settings to memory (M1-M4) and recalls presets.
Switches between radio and auxiliary inputs; can be used for muting.
Manages subwoofer volume and selects cut-off frequencies (30-120Hz).
Details connecting the red wire to battery B+ and black wires for proper grounding.
Connects the yellow wire to the power antenna lead for auto on/off.
Diagram shows RCA connections for controllers, main unit, and amplifier outputs.
Lists power, polarity, current, frequency response, and dimensions.
Details included items: controller, main box, bracket, cables, and hardware.
To Next Page
